- RGB LED PWM control Signal Amplifier – Used to extend the range and synchronize multiple LED strip to a single LED Controller, i.e. EV-RGBCTRL-4A
- Receives PWM signals from the controller, and synchronizes and amplifies.
- Many EV-RGBAMP-WP4A may be connected to a single Controller
- Used to amplify any 12V or 24V LED PWM signal up to 4A per ch (3 channels)
- 12V DC (or 24V) driver required to power this amplifier, dependant on LED strip wattage
- Max power Controlled 144W @ 12V (CMOS open drain, Common Anode)
- Dimensions: 3.74”L x 2.09”W x 1.22”H (95L x 53W x 31H mm)
- Static Power consumption: <1W (Needs an external 12V source)
- 145g / 0.32lb
- Working temp -20C to +60C
- 1 year warranty
| Voltage / Power | |
| Input Voltage | 12-24V DC |
| Output Voltage | 12-24V DC |
| Constant Current / Voltage | Constant Voltage |
| Wattage | 144W |
| Output Current | 4A/ch |
| General | |
| IP Rated | IP67 No Dust / Water to 3.3ft |
| Cable Included | Yes |
| Wiring (Series / Parallel) | Parallel |
| Location | Outdoor |
| Material | Plastic |
| Fixing | Wall |
| Dimensions | |
| Length | 3.78" |
| Width | 2.09" |
| Height | 1.22" |
| Warranty | |
| 1 yr. | |
12V / 24V RGB 4A Signal Amplifier Range Extender Waterproof IP67
- Brand: illuminous
- Product Code: EV-RGBAMP-WP4A
- Availability: Out Of Stock
-
$8.49